Technical Parameter
Volume range of filling: 0.1ml—30ml
Time range of filling: 0.5—30s
Speed range: Calculate automatically according to the volume and time of filling.
Back Suction Angle: 0—1000°
Speed range of Tubing wash: Tubing wash and pre-filling, 15—350 rpm(13#, 14#, 19#, 16#)
Calibration: put the actual volume into the pump, it can make a calibration automatically.
Adjust solution amount online: Users can adjust the solution amount and percentage online
Number of filling: can set the filling times without signal control, 1—60000, “0″ means infinite loop way.
Start/stop control (stop—filling when lack of bottles): 4 pairs of contacts input, corresponding to 4 channels.
Memory Function: Repower the pump, it can keep the parameters before power—down.
Communication Interface: RS485, Support Modbus Rlues.
Dimension: 640×265×130 (mm)
Available Power: 220VAC±10%/150W
Working condition temperature: 0℃—40℃
Relative Humidity : <80%
IP Grade: IP31
Technical Data Sheet
Available Pumphead | Filling Volume(ml) | Tubing specification | Filling Time(s) | repeatability error | Dispensing head ID(mm) | Production Capacity (pcs/min) |
DMD15-1A | 0.1-0.3 | 2×13″ | 0.5-0.7 | ±6μl | ≤0.5 | 40-35 |
0.3-0.6 | 0.7-1.1 | ±2% | ≤0.5 | 35-28 | ||
0.6-1.0 | 1.1-1.7 | ±1% | ≤0.5 | 28-22 | ||
0.6-1.0 | 4×13″ | 0.7-1.0 | ±2% | ≤1.0 | 35-30 | |
1.0-2.0 | 1.0-1.8 | ±1% | ≤1.0 | 30-21 | ||
1.0-2.0 | 2×14″ | 0.6-0.9 | ±2% | ≤1.0 | 37-31 | |
2.0-4.0 | 0.9-1.6 | ±1% | ≤1.0 | 31-23 | ||
2.0-3.0 | 2×19″ | 0.7-0.9 | ±2% | ≤1.5 | 35-31 | |
3.0-5.0 | 0.8-1.3 | ±1% | ≤1.5 | 33-26 | ||
4.0-6.0 | 2×16″ | 0.8-1.0 | ±2% | ≤2.0 | 33-30 | |
6.0-10.0 | 1.0-1.6 | ±1% | ≤2.0 | 30-23 |
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..